TM-06 has 8 signal inputs, each of them can work as an analog or digital input. Analog inputs can work in current mode (0-20 or 4-20mA) or voltage mode (0-5 or 0-10 V). Digital inputs work within the 0-30V voltage range. The voltage value at which the digital input detects a high state is also configurable. TM-06 can work in M2M systems, it can be connected to SCADA systems, PLCs, and other devices that use MODBUS RTU protocol. It can work directly with HMIs.
The most important features:
- 8 analog or digital inputs,
- Analog inputs that can work in voltage or current mode,
- Many possible configurations
- Diodes that show the current state of TM-06
- RS485 communication interface
- built-in digital filter
- the measuring system is separated from the power supply and RS485
- easy connecting
- parameters stored in nonvolatile memory
| Parameters | Value |
| Number of inputs | 8 (Analog or digital – parameter set with a PC app.) |
| Communication interface | RS485 MODBUS |
| Power supply | 10 – 30 V DC |
| Power | 2,5 W (for 24 V) |
| Voltage range for digital inputs | 0-30 V DC (With a switching threshold that can be set in a 0-10V range) |
| Digital inputs’ work frequency | 0 – 10 Hz |
| Analog inputs: current mode | 0-20 mA or 4-20 mA (Parameter set with a PC app.) |
| Analog inputs: voltage mode | 0-10 V or 0-5V (Parameter set with a PC app. ) |
| Diameters | 25×82,5×76 mm |
| Mounting | On DIN TS35 |
Configurable analog to digital inputs ratio provides high flexibility and a wide range of applications.
The TM-06 can work with any touch screen that uses MODBUS protocol sending data directly to it.
The TM-06 can be connected with the NC-01 Industrial modem, this way it can work in distributed data gathering systems.
When connected to a SCADA system it can make a comprehensive system for supervising and controlling industrial processes.